烟台总代理 PA66 德国巴斯夫 A3WG3 增强级

Ultramid A3WG3 PA66

（我司可提供COA，SGS，UL黄卡，加工参数。欢迎来电索 ) 

Rheological properties	dry / cond	Unit	Test Standard
Melt volume-flow rate (MVR)	60 / *	cm3/10min	ISO 1133
Temperature	275 / *	°C	ISO 1133
Load	5 / *	kg	ISO 1133
Mechanical properties	dry / cond	Unit	Test Standard
Tensile Modulus	6000 / 4500	MPa	ISO 527-1/-2
Stress at break	130 / 85	MPa	ISO 527-1/-2
Strain at break	3 / 10	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 2600	MPa	ISO 899-1
Charpy impact strength (+23°C)	45 / 70	kJ/m2	ISO 179/1eU
Charpy impact strength (-30°C)	43 / -	kJ/m2	ISO 179/1eU
Charpy notched impact strength (+23°C)	8 / 11	kJ/m2	ISO 179/1eA
Charpy notched impact strength (-30°C)	7 / -	kJ/m2	ISO 179/1eA
Thermal properties	dry / cond	Unit	Test Standard
Melting temperature (10°C/min)	260 / *	°C	ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)	240 / *	°C	ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)	250 / *	°C	ISO 75-1/-2
Vicat softening temperature (50°C/h 50N)	250 / *	°C	ISO 306
Coeff. of linear therm. expansion (parallel)	32.5 / *	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)	75 / *	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.5 / *	mm	IEC 60695-11-10
UL recognition	UL / *	-	-
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.8 / *	mm	IEC 60695-11-10
UL recognition	UL / *	-	-
Oxygen index	24 / *	%	ISO 4589-1/-2
Electrical properties	dry / cond	Unit	Test Standard
Relative permittivity (1MHz)	3.5 / 5.5	-	IEC 60250
Dissipation factor (100Hz)	140 / 3000	E-4	IEC 60250
Dissipation factor (1MHz)	140 / 3000	E-4	IEC 60250
Volume resistivity	1E13 / 1E10	Ohm*m	IEC 60093
Surface resistivity	* / 1E10	Ohm	IEC 60093
Electric strength	40 / 34	kV/mm	IEC 60243-1
Comparative tracking index	- / 450	-	IEC 60112
Other properties	dry / cond	Unit	Test Standard
Water absorption	7 / *	%	Sim. to ISO 62
Humidity absorption	2.2 / *	%	Sim. to ISO 62
Density	1230 / -	kg/m3	ISO 1183
Material specific properties	dry / cond	Unit	Test Standard
Viscosity number	145 / *	cm3/g	ISO 307, 1157, 1628
Rheological calculation properties	Value	Unit	Test Standard
Density of melt	1070	kg/m3	-
Thermal conductivity of melt	0.205	W/(m K)	-
Spec. heat capacity melt	2570	J/(kg K)	-
Ejection temperature	190	°C	-
Test specimen production	Value	Unit	Test Standard
Injection Molding, melt temperature	290	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294